Search

For bulk order, please contact sales@worldronemarket.com and we will provide the best service and price for you. Thank you!
Chinowing E11 User Manual

Chinowing E11 User Manual

Table of Contents Product Introduction The E11 network router is mainly designed for not enough interfaces of network image transmission, It provides three 100M LAN interfaces. Three network serial ports supports TTL,RS232 hardware level, network protocol which supports TCP server, TCP client, UDP client, UDP server, and HTTPD client multiple working modes.
Chinowing VM31 Mesh Video Link

Chinowing VM31 Mesh Radio User Manual

Table of Contents 1. Product Introduction 1.1 Product Introduction and Parameters VM31 is mesh radio developed based on LTE, OFDM, MIMO. With dual 10/100 Ethernet and serial gateway functions, it provides reliable wireless Ethernet bridge functions and gateway services for most devices. VM31 combines smooth integration with 3-in-1 (video, telemetry, RC) link for
CUAV 7-Nano User Manual

CUAV 7-Nano User Manual

Table of Contents 7-Nano 7-Nano is a micro autopilot developed for miniaturized unmanned system equipment. It is independently developed and produced by CUAV. It innovatively adopts a stacked design and integrates a high-performance STM32H7 processor, dual redundant industrial-grade IMU and rich and complete expansion interfaces in a very small space; it supports

Zingto INYYO Q12 User Manual

Table of Contents Part Description Quick-release lug Yaw arm Yaw electric machinery Roll electric machinery Roll arm Pitch electric machinery Visible light module Thermal imager Packing list  Packing type  Full telescope  Inner liner  Sponge  Packing size 264(L)×192(W)×157(H)mm Packing weight 1215±10g The pod body contains a 32G Mirco SD card. Due to the different user's usage environment and mechanical platforms interfaces, please equip other wire rod according to

Zingto INYYO Q303 User Manual

Table of Contents Part Description Quick-release lugYaw armYaw electric machineryRoll electric machineryRoll armPitch electric machineryVisible light moduleThermal imagerLaser ranging moduleCard Slot Packing list Packing typeAir caseInner linerSpongePacking size365(L)×270(W)×190(H)mmPacking weight2963±20gThe pod body contains a 32G Mirco SD card.Due to the different user's usage environment and mechanical platforms interfaces, please equip other wire rod according to the electrical interface definition
CUAV Nora

CUAV Nora Flight Controller User Manual

Table of Contents Nora+/Nora Autopilot Nora+® is an advanced autopilot independently designed by CUAV®. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors. Compared with the previous flight controller, it has better performance and more reliability. This board can run ArduPilot firmware with PX4 firmware. Nora+ is ideal for academic research and commercial systems'
New Project

P8 Configuration Guide

Table of Contents P8 Configuration Tip The P8 has already been configured at the factory. Generally, you do not need to configure this document. If you have requirements, you can configure it according to the instructions below. Configuration Mode Enable: Use the USB cable to connect the P900 data transmission to the computer, open the
CUAV P8 Radio Drone Telemetry 2 - CUAV P8 Module User Manual

CUAV P8 Module User Manual

Table of Contents Product Definition Indicator Light Definition Configuration mode establish  communication Unmatched ST Light: Red always on Ground Unit ST Light: pink flashing RSSI lamp: always on Sky Unit ST Light: Green always on RSSI Light: always on Ground Unit ST Light: Always bright RSSI : lights off Sky Unit ST Light: Always bright RSSI Light: Flashing Button Definition RESET Button Restart the P8 Module CONFIG Button Pressing it alone is not defined. Press and hold the CONFIG and RESET Key at the same time. Release the RESET key first, and then release the CONFIG key to enter the
CUAV X7+ Pro User Manual

CUAV X7+ Pro User Manual

Table of Contents X7+ Pro Autopilot X7+ Pro® is an advanced autopilot independently designed by CUAV®. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. Compared with the previous flight controller, it has better performance and more reliability. This board can run ArduPilot firmware perfectly. X7+ Pro is
CUAV X7+ User Manual

CUAV X7+ User Manual

Table of Contents X7+ Autopilot X7+® is a state-of-the-art autopilot developed independently by CUAV®. It features a high-performance STM32H7 processor and incorporates industrial-grade sensors. Compared to its predecessor, this flight controller offers enhanced performance and increased reliability. It is fully capable of running ArduPilot firmware and will also be compatible with PX4
Zingto INYYO Q102 User Manual

Zingto INYYO Q102 User Manual

Table of Contents Product Introduction Overview The SONY motion camera, specially designed for the Zingto INYYO Q102, has 4K visible light resolution and uses a unique motion vision focusing algorithm and real-time HDR processing technology to maintain accurate focus at high speeds and capture and restore the natural gorgeous colors of different
Pixhawk 6X Pro User Manual

Pixhawk 6X Pro User Manual

Table of Contents Overview Key Design Point High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applicationsAll New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applicationsHigh performance STM32H753 ProcessorEthernet interface for high-speed
Back to Top
Product has been added to your cart