CUAV NEO 3 Pro GPS Module | GNSS U-BLOX M9N CAN BUS
CUAV NEO 3 Pro GPS continues the hardware design of NEO V2, upgrade the GNSS module to Ublox NEO M9N, supports Beidou, Galileo, Glonas and GPS receive at the same time, and the horizontal positioning accuracy is up to 0.7M. Integrated with safety switch, buzzer, RGB light.
Ublox M9N Satellite receiver
It is a new generation satellite receiver based on Ublox M9N, the actual measurement can reach a maximum accuracy of 0.7m.
Simultaneous reception by the four satellite systems
It supports simultaneous reception of Beidou, Galileo, Glonas, and GPS four satellite systems. Also, it has the high-performance processing unit STM32F412 built-in and using RM3100 industrial grade sensor, has better anti-interference performance.
Triple filter design
NEO 3 Pro adopts SAW+LNA+SAW triple filter design, effectively avoiding the influence of remote control, data transmission, 4G signal on GPS positioning reception.
NEO 3 Pro level accuracy when the SBAS enhancement system is turned on, the nominal accuracy is 1.5 m (default); when the SBAS enhancement system is turned off, it is 2.0 m. NEO 3 Pro supports RTCM3.3 injection, but does not support RTCM output; it can achieve pseudo range differential (meter-level positioning) but does not support carrier phase differential (RTK), and it needs a base station that supports RTCM3.3 output.
For installation and configuration, please visit CUAV NEO V3 Pro GPS Manual
Check out the regular version of CUAV GPS: CUAV NEO 3 GPS