Product Manual

Mauch Power-Cube 1 / V3 Manual
The Power-Cube series was developed in response to the increasing power demand of bigger UAV-s together with the new Pixhawk 2.1. The installed equipment, such as heated IMU’s, optical flow sensors, OSD, dual GPS, telemetry, companion computers, gimbal, camera, landing gear, parachute, digital servos, LED-s, Raspberry Pi 3, Lidar require additional and more reliable and robust power supply.

Lipo Battery Guide
Lipo Battery Guide What’s a Lipo battery? Lipo Battery, its full name is lithium polymer battery, people also called Li-po battery, or more correctly lithium-ion

Skydroid H12 Manual
Skydroid H12 2.4Ghz long range radio can reach 5 to 30km. It has clear image, low delay, long range, strong anti-interference and other features. So it can be widely used on agriculture drones, FPV sevurity, fire protection, electric power, surveying and mapping robots, border defenses, etc.

Skydroid T12 Manual
Skydroid T12 Manual: 1.Connect to cellphone APP 2.Receiver / Camera / FC Connection and Setting 3.Connect to Cellphone to Display the Video

Ardupilot Camera Shutter Configuration
Ardupilot Camera Shutter Configuration:PWM trigger & Relay trigger

PX4 Autopilot User Guide-Battery and Power Module Setup
PX4 Autopilot User Guide-Battery and Power Module Setup

Communicating with Raspberry Pi via MAVLink
This page explains how to connect and configure a Raspberry Pi (RPi) so that it is able to communicate with a flight controller using the MAVLink protocol over a serial connection. This can be used to perform additional tasks such as image recognition which simply cannot be done by the flight controller due to the memory requirements for storing images.

CUAV CAN PMU User Manual
CUAV CAN PMU User Manual and CAN PMU Upgrade Firmware.CUAV’s CAN/DroneCAN PMU is a drone power management module with built-in STM32F4 processor running CUAV’s ITT compensation algorithm to accurately measure the voltage and current of the drone’s battery.

CUAV P9 Radio User Manual
CUAV P9 Radio User manual.CUAV P9 Radio is CUAV’s new long-range drone data link communication module. It has high power, high speed and high receiver sensitivity, which is very suitable for UAV communication system.

CUAV C-RTK 9P User Manual
CUAV C-RTK 9P User Manual.CUAV C-RTK 9P Receiver is an RTK GPS module designed by CUAV for the professional market. It uses Ublox’s F9P module, supports multi-satellite multi-frequency, and uses advanced RTK algorithms.

CUAV NEO 3 Pro User manual
CUAV NEO 3 Pro Users manual.CUAV NEO 3 Pro uses a hardware design similar to NEO v2 Pro, and upgrades the GNSS navigation module to the M9N module that supports the four mainstream satellite systems of Beidou, GPS, Galileo and Glonass. The positioning accuracy has been significantly improved. It is a high Cost-effective unmanned system positioning and navigation module.

CUAV NEO 3 User Manual
CUAV NEO 3 Users manual.CUAV NEO 3 uses a hardware design similar to NEO v2, and upgrades the GNSS navigation module to the M9N module that supports the four mainstream satellite systems of Beidou, GPS, Galileo and Glonass. The positioning accuracy has been significantly improved. It is a high Cost-effective unmanned system positioning and navigation module.