Holybro Kakute H7 v1.5 Stacks

Product codeN/A

Availability Out of stock

The version that is being shipped at the moment is Kakute H7 V1.5. From V1.3, now has USB-C, 9V 3A BEC for VTX, and a JST-SH connector for VTX port.
Due to the end of production of MPU6000 IMU, ICM-42688-P will be used for the new version of Kakute H7, which is supported by Betaflight version 4.5.2 and later

Please contact ‘sales@worldronemarket.com’ If you would like to purchase Holybro Products.

Holybro Kakute H7 v1.5 Stacks

The Holybro Kakute H7 v1.5 Stacks Flight Controller packs rich features. First of all, it comes with integrated Bluetooth, dual plug-and-play 4in1 ESC ports and an HD camera plug. Besides, it has a barometer, OSD, 6 UARTs, a full Blackbox MicroSD card slot, 5V and 9V BEC, plus an easy soldering layout.
To start with, the Kakute H7 inherits the best features from its F7 predecessor. Furthermore, it upgrades hardware components and PCB layout. Thanks to the onboard integrated Bluetooth chip, you can tune Betaflight wirelessly on your phone. Just use the SpeedyBee app for Android and iOS.
In addition, the Kakute H7 supports DJI HD systems. It offers a simple plug-and-play port with an onboard 9V regulator. This port powers HD video transmitters such as DJI/Caddx FPV Air Unit and Caddx Vista. Meanwhile, it also works with analog FPV systems.

Follow us World Drone Market on our YouTube to view more about the Holybro KAKUTE H7 v1.5 STACK.

Kakute H7 V1.3 Specification :

MCU – STM32H743 32-bit processor running at 480 MHz
Professional underfill epoxy for mechanical reinforcement
IMU – MPU6000
Barometer – BMP280
OSD – AT7456E
Onboard Bluetooth chip – ESP32-C3
SpeedyBee IOS & Android App Compatible
Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm) in Betaflight
6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
9x PWM Outputs (8 Motor Output, 1 LED)
2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit)
Battery input voltage: 2S – 8S
BEC 5V 2A Cont.
BEC 9V 3A Cont
USB Type-C
Mounting – 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
Dimension – 35x35mm
Weight – 8g

Firmware Targets

BetaFlight: KakuteH7 (v4.2.11 and above)
INAV: KakuteH7 (4.0.0 & above) SD card support added in 4.1.0.
ArduPilot: KakuteH7 (4.2.0 & above)

Package Includes:

1x Kakute H7 V1.3 Flight Controller
4x M3 Silicon Grommets
2x JST-SH1.0_8pin 150mm Cable (For ESCs)
2x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit)
1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)

Tekko32 F4 4in1 60A ESC

The Tekko32 F4 4‑in‑1 60A ESC is a high‑performance electronic speed controller. This compact 4‑in‑1 ESC features a 30×30 mounting pattern and supports 3‑6S LiPo batteries.

It adopts brand‑new high‑quality MOSFETs with low internal resistance and low heat generation. These components deliver efficient power output and smooth flight, and the ESC reaches a 60A continuous current rating.

Besides, it uses separate drive and control circuits. This design expands the drive circuit’s current capacity and lowers electrical interference for the control circuit.

What’s more, it runs cutting‑edge BLHeli_32 firmware with a 96K PWM frequency. You get lightning‑fast response and outstanding motor control performance.

Features:

All new High-quality MOSFETs with low internal resistance and low heat generation
Fast F4 MCU @150MHz (compared to F3 @108MHz & F0 @48MHz)
A separate drive and control circuit, reducing the electrical interference
Continuous Current Rating of 60 Amps