Search

For bulk order, please contact sales@worldronemarket.com and we will provide the best service and price for you. Thank you!

Here 3 with iStand CAN GNSS

Product codeHX4-06206
Availability Only 2 left in stock

$210.00

Included:

  • Here 3 Can GNSS GPS * 1
  • Cables * 1
  • Manual * 1
  • 3M stickers * 1
  • iStand * 1
Buy it now

Here 3 with iStand CAN GNSS GPS

Here 3 GPS GNSS is a high precision GNSS system that supports RTK mode, built with CAN protocol. It is also designed to be dust-proof and splash-proof up to a certain limit. Equipped with STM32F302 processor, it provides faster processing speed and better reliability GNSS receiver, and provides GPS position hold capability. Hex Here3 GPS unit module (M8P) is an upgraded version of drone GPS based on Here 2 GNSS GPS (M8N) unit, Here3 GPS is compatible with Pixhawk 2.1 and most of the other open-source flight controllers.

Here3 is one of the smallest, lightest and most power efficient RTK module available on the market. In addition to the size and cost advantage, this module has an industry-leading navigation sensitivity of -167dBm.Using integrated real time kinematics (RTK) give you centimeter accurate positioning through concurrent reception of up to 3 GNSS at the same time (GPS, Galileo, GLONASS, BeiDou).

Follow us World Drone Market on YouTube to view more videos about Here 3 RTK GNSS.

Features

  • Cost-efficient high precision and RTK supported GNSS chip (For using the GPS RTK function, base station is needed). Positioning accuracy down to centimeter-level in an ideal environment.
  • Brand new design with improved visibility on signal LEDs. Better dust and water resistance (Not guaranteed to be water-proof under any situation due to the complexity of the operating environment).
  • The high data rate, upgradeability, noise immunity, and real-time features benefited from CAN protocol
  • Equipped with STM32F302 high-performance processor in a real-time operating system. The framework developed by Hex provides additional stabilities.
  • Supports future firmware updates. Support from ground control software. Future updates will be available from Mission Planner.
  • Built-in a complete set of Inertial Measurement Unit (compass, gyroscope, and accelerometer), which satisfy advanced navigation needs.

Specification

  • Receiver Type: u-blox M8 high precision GNSS modules (M8P)
  • Satellite Constellation: GPS L1C/A, GLONASS L1OF, BeiDou B1I
  • Positioning accuracy: 3D FIX: 2.5 m / RTK: 0.025 m
  • Processor: STM32F302
  • IMU sensor: ICM20948
  • Navigation Update Rate : 8Hz Max
  • Communication Protocol: CAN
  • Operating Temperature: -40℃ to 85℃
  • Dimension: 76 mm * 76 mm * 16.6 mm
  • Weight: 48.8g

For a complete Here 3 GPS RTK solution, you will need Here 3 RTK Base additionally. Visit World Drone Market to get more drone accessories.

Hardware Specifications Comparison

Model Here 3 CAN GNSS Here3+
Receiver Type u-blox high precision GNSS modules (M8P-2) u-blox high precision GNSS modules (M8P-2)
Satellite Constellation GPS L1C/A, GLONASS L1OF, BeiDou B1I GPS L1C/A, GLONASS L1OF, BeiDou B1I
Positioning accuracy 3D FIX: 2.5 m / RTK: 0.025 m 3D FIX: 2.5 m / RTK: 0.025 m
Processor STM32F302 STM32H757
IMU sensor ICM20948 ICM42688,RM3100
Navigation Update Rate 8 Hz 8 Hz
Communication Protocol DroneCAN 1Mbit/s DroneCAN 8Mbit/s
Operating Temperature -40℃ to 85℃ -40℃ to 85℃
Dimension 68mmx68mmx16mm 68mmx68mmx16mm
Weight 48.8g 51.8g

Check more detail about product in Here 3 CAN GNSS GPS Manual.

Here 3 with iStand CAN GNSS 1 - Here 3 with iStand CAN GNSS Here 3 with iStand CAN GNSS 2 - Here 3 with iStand CAN GNSS Here 3 with iStand CAN GNSS 3 - Here 3 with iStand CAN GNSS Here 3 with iStand CAN GNSS 4 - Here 3 with iStand CAN GNSS Here 3 with iStand CAN GNSS 5 - Here 3 with iStand CAN GNSS

Weight 0.5 kg
Dimensions 17 × 10 × 7 cm

Reviews

There are no reviews yet.

Be the first to review “Here 3 with iStand CAN GNSS”

Back to Top
Product has been added to your cart
error: Alert: Content selection is disabled!!