Pixracer R15 Autopilot
Not only does the Pixracer R15 Autopilot retain all the functionalities of the original Pixhawk, including version 2, but it also delivers plenty of extra features! Furthermore, it is size‑optimized and comes with an ideal number of inputs/outputs. Thanks to this design, it can easily switch between a comprehensive autopilot system (with auto‑landing and full navigation) and a high‑performance racing platform.
Apart from that, the Pixracer R15 Autopilot model features upgraded accelerometer/gyro as well as magnetometer sensors; what’s more, it is ROHS (Lead‑Free) compliant. In addition, it integrates an ESP8266 module for convenient WiFi updates and ships with the latest Ardupilot ESP8266 firmware. Best of all, this new firmware provides a user‑friendly web interface alongside MavLink2 support, and it also streamlines future firmware updates directly via this web interface.
Specifications
Microprocessor:
- 32-bit STM32F427 Cortex M4 core with FPU rev. 3
- 168 MHz/256 KB RAM/2 MB Flash
External Memory:
- F-RAM Cypress MF25V02-G 256-Kbit nonvolatile memory (Flash memory that performs as fast as RAM)
- SD Card slot with 8gb Micro SD card SanDisk. Adapter included
Sensors:
- Invensense MPU-9250 3-axis accelerometer/gyroscope/magnetometer
Invensense ICM-20602 or ICM-20608 3-axis accelerometer/gyroscope
MEAS MS5611 barometer - ST LIS3MDL magnetometer
Interfaces:
- 5x UART (serial ports), 2x with HW flow control and GPS+I2C®
- CAN
- Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX9 and above.
- Futaba S.BUS® & S.BUS2® compatible input
- FRSky Telemetry port output
- Graupner SUMD
- Yuneec ST24
- PPM sum input signal
- OneShot PWM output (Configurable)
- RSSI (PWM or voltage) input
- I2C
- SPI
- External microUSB port
- JTAG
- Dronecode Debug connector
- WiFi Telemetry & firmware update via ESP8266 (Included!)
- 6x PWM outputs
- JST-GH connectors using Dronecode connector standard























There are no reviews yet.