Search

For bulk order, please contact sales@worldronemarket.com and we will provide the best service and price for you. Thank you!

Mateksys Flight Controller F405-VTOL

Product codeBS040-213
Availability Out of stock

$59.99

Package Included:
  • 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
  • 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
  • 1x MATEKSYS F405-VTOL Flight Controller
  • 1x Rubycon ZLH 35V 470uF capacitor

Mateksys Flight Controller F405-VTOL

The Mateksys flight controller F405-VTOL is a flight controller specially designed for vertical take-off and landing (VTOL) aircraft. Manufactured by Mateksys, it adopts modern flight controller technology and works with many VTOL platforms, including fixed-wing, multirotor and hybrid VTOL airframes.

Core Hardware & Processing Performance

Mateksys F405-VTOL delivers strong computing performance and abundant built-in features. It is powered by the STM32F405 processor based on the high-performance ARM Cortex-M4 core, supporting fast data calculation and accurate flight control. This flight controller integrates a full set of onboard sensors: accelerometer, gyroscope, magnetometer (compass) and barometer. These sensors supply reliable attitude and altitude data for stable flight.

Supported Flight Modes & Tuning Functions

The F405-VTOL supports a wide range of standard flight modes. Available modes include attitude stabilization, altitude hold, position hold and autonomous waypoint navigation. It also supports flexible custom tuning. Pilots can adjust and optimize flight parameters to match their specific airframe and mission requirements.

Expansion Interfaces & Peripheral Compatibility

This FC comes with plenty of expansion ports for external devices and auxiliary sensors. Users can hook up GPS modules, LED lights, telemetry radios and other payloads to extend aircraft functionality.

Mechanical Specs, Power System & Onboard PDB

The MATEKSYS F405-VTOL flight controller supports both 25×25 and 35×35 mounting patterns, with a weight of 25g. It comes with a barometer, BlackBox MicroSD recorder, 6 UART ports, 4 ADC channels and 12 PWM outputs. Two PINIO pads are available for camera switching and other trigger functions.

Its integrated power distribution board supports 5 independent ESC/motor channels. The input voltage ranges from 6.8–30V DC (2–6S LiPo). This flight controller also has a built-in 220A high-precision current sensor and multiple BEC outputs.

  • 5V 2A BEC for flight controller and low-power peripherals
  • 9V 2A BEC (12V optional version available) for cameras and VTX
  • VX BEC: 8A continuous, 10A peak for servos
Summary

In conclusion, the Mateksys F405-VTOL is a high-performance flight controller built for VTOL aircraft. It offers dependable, high-precision flight control and navigation for vertical take-off and landing missions.

Follow us World Drone Market on our YouTube to view more about the Mateksys Flight Controller F405-VTOL

You can also directly click on our official website World Drone Market to learn more about the latest products of drones.

Features
  • BEC VX 8A cont. 10A Peak for servos (5V,6V,7.2V option)
  • BEC 9V 2A, 12V option for Camera/VTX
  • 2x PINIO (Camera switch, P101 pad)
  • 25×25 and 35×35 mounting patterns
  • 220A High-precision current sense
  • BEC 5V 2A for FC and peripherals
  • PDB for 5x individual ESC/Motors
  • 6.8-30V DC IN (2-6S LiPo)
  • MCU STM32F405RGT6
  • Barometer SPL06-001
  • BlackBox MicroSD
  • 12x PWM outputs
  • IMU ICM42688-P
  • OSD AT7456E
  • 6x UARTS
  • 4x ADC
Specifications
  • Mounting: 25 x 25 mm-Φ2mm, 35 x 35 mm- Φ4 mm
  • Built in inverter on UART2-RX for SBUS input
  • MCU: STM32F405RGT6, 168MHz , 1MB Flash
  • USB/Beep Extender with Type-C(USB2.0)
  • 6x UARTs, 1x Softserial_Tx option(INAV)
  • 4x ADC (VBAT, Current, RSSI, Airspeed)
  • Weight: 25g w/ USB/buzzer adapter
  • Switchable Dual Camera Input
  • 1x spare PINIOOSD: AT7456E
  • Dimensions: 45 x 42 x 15 mm
  • Blackbox: MicroSD card slot
  • 12x PWM outputs
  • IMU: ICM42688-P
  • Baro: SPL06-001
  • 1x I2C
FC Firmware
  • INAV: MATEKF405TE_SD (INAV 5.0 or newer)
  • ArduPilot: MatekF405-TE
PDB
  • Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
  • Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
  • Support continuous load of up to 100A on ESC pad near the current sensor resistor
  • Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
  • Sense resistor: 100A continuous, 220A peak
  • 5x ESC power pads, total 100A continuous
  • Input voltage range: 6.8~30V (2~6S LiPo)
BEC 5V output
  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Continuous current: 2 Amps
BEC 9V /12V output
  • For stable 9V/12V output, input voltage should > output voltage +1V
  • Designed for Video Transmitter, Camera, Gimbal ect
  • Continuous current: 2 Amps
  • 12V option with Jumper pad
BEC Vx output
  • for stable Vx output, input voltage should > Vx voltage +1V
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current: 8 Amps, 10A Peak
  • Designed for Servos
BEC 3.3V output
  • Designed for Baro / Compass module and external 3.3V peripherals
  • Continuous current: 200mA
  • Linear Regulator
IMPORTANT NOTES :      Board is shipped unsoldered.

Links      Firmware

FLIGHT CONTROLLER F405 VTOL1 1024x410 - Mateksys Flight Controller F405-VTOL

FLIGHT CONTROLLER F405 VTOL3 - Mateksys Flight Controller F405-VTOL

FLIGHT CONTROLLER F405 VTOL2 - Mateksys Flight Controller F405-VTOL

Weight 0.5 kg

Customers reviews

There are no reviews yet.

Be the first to review “Mateksys Flight Controller F405-VTOL”
Back to Top
Product has been added to your cart