Mauch PC 2x 200A PDB/4x 20cm 8AWG
Mauch PC 2x 200A PDB / 4x 20cm 8AWG suitable for Pixhawk 2.1 (The Cube) and other flight controllers (via adapter cables) all-in-one PDB. It integrates 2x200A Hall sensors, Sensor Hub X2, 4-14S HYB-BEC, and most importantly, it is equipped with a main power switch with a continuous current of 400A. The output is connected through 3.5mm banana plugs, and there are backup BEC connectors before and after the switch.
This design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.
This new PC Series PDB includes two fully redundant BEC’s with POWER1 and POWER2 for the FC. A higher output current of 2x 5A per BEC. Fully redundant power supply for the PDB control circuit… etc.
Less wiring = Cleaner builds
Protect your ESC’s and other equipment due to smooth power-up from GND.
Specifications:
Input 2x 4-14S (max.65V) with transient spikes of up to 85V.
2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.
Hub X2 can be deactivated for single battery usage.
2x 5.3V / 5A power supply for Flight Controller
2x 20cm 8AWG input cables (red/black)
Only 75 x 49 x 27mm ⇾ 112g (without cables)
Recommended maximum AUW of UAV = 50kg
Follow us World Drone Market on our YouTube to view more about the PC 2x 200A PDB/4x 20cm 8AWG.
Be the first to review “Mauch PC 2x 200A PDB/4x 20cm 8AWG”
You must be logged in to post a review.