Mauch PL-200 Sensor board 2x10cm 10AWG / With CFK Enclosure

Mauch PL-200 Sensor board 2x 10cm is a 200A Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details. Mauch PL-200 Sensor board 2x10cm connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.

REM: The connector is Molex / Click-Mate / 1.25mm / 4p (5023800400)

Without CFK enclosure = 27.5 x 19.5 x 10.5mm / 22g (with 2x 10cm 10AWG)

With CFK enclosure = 43.5 x 23.0 x 15mm / 27g (with 2x 10cm 10AWG)

Delivery in PP box: 65 x 65 x 20mm / 42g

Delivery without sensor cable (comes with the BEC’s), with CFK enclosure

REM: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V.

For other drone accessories, please visit our Store. Watch more about products on our YouTube.