Mauch PL 4-6S BEC

Mauch PL 4-6S BEC / 2x 5.3V-3A + 1x 12V-3A / With CFK Enclosure

Mauch PL 4-6S BEC supports Input 4-6S LiPo / max. 28V and Output 2x 5.35V / 3A?+ 1x 12.0V / 3A -> +/- 0.05V ? Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with Molex Click-Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.

For other drone accessories, please visit our Store. Watch more about products on our YouTube.

Blue power “ON’ LED. (3x)

32mm x 50mm x 7mm / 19g without CFK enclosure

34mm x 52mm x 10mm / 24g with CFK enclosure

Scope of delivery:

1x Mauch PL-4-6S BEC 3x

1x CFK enclosure

1x Mauch Sensor cable (040) Molex Clik-Mate 4p / L = 150mm

1x Backup cable (050) for Pixhawk 2.1 / Molex Clik-Mate 2.0-6p / L = 150mm

1x 12.0V output cable one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm

REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:

041: DF13-6p -> Pixhawk 1 / APM… etc.

042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1

043: JST-GH-6p -> Pixhawk 3… etc