Loading...
Mauch HS-050-HV Sensor Board / 2x 10cm 12AWG
Mauch HS-050-HV 50A – Current measurement sensor board, based on Allegro Hall Sensor ACS-50U.
The voltage reading of the LiPo is optimized for up to 14S LiPo packs.
This Mauch Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry… etc.
Connected to the sensor are 2x10cm AWG12 wire (red) as a standard.
The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different length, then please order it separately.
For other drone accessories, please visit our Store. Watch more about products on our YouTube.
| Weight | 0.0286 kg |
|---|---|
| Dimensions | 3 × 4 × 1 cm |
Reviews
There are no reviews yet.
Be the first to review “Mauch HS-050-HV”
You must be logged in to post a review.