CUAV MS5525 Airspeed Sensor With Pitot Tube
CUAV MS5525 Airspeed Sensor Pitot Tube is an airspeed measurement module launched by CUAV for plane or VTOL UAV. It measures the relative speed of the aircraft and the air. It can help the UAVs to fly and land stably under windy conditions and avoid crash. It is an indispensable part of plane and VTOL UAVs.
CUAV MS5525 Airspeed Sensor With Pitot Tube 0.84pa High Precision Pixhawk/V5/X7 Flight Control Airspeed Meter For FPV Drone
Highly recommended for fixed-wing and VTOL frames. They are so important because the autopilot does not have other means to detect stall. For fixed-wing flight it is the airspeed that guarantees lift not ground speed!
Airspeed sensors are available in analog and digital (I2C communication) versions. Using the pitot tube, static and total air pressure are measured to calculate airspeed. The placement of the pitot is essential and should be installed properly to be directly in the airstream, and the holes on the pitot should not be covered. In a setup where the propeller is in the nose, the pitot is usually mounted on the wing, which is outside of propeller airflow. The static and dynamic ports are marked on both the sensor and the pitot and should be connected accordingly.
The correct operation of the airspeed sensor CUAV can be checked using your favorite ground station choice (MissionPlanner, QGroundControl, etc.). By indirectly blowing into the tube or covering it using your finger, you should be able to see the sensor response.
Follow us World Drone Market on our YouTube to view more about CUAV Airspeed Sensor Pitot Tube.
CUAV HOT Pitot Tube Airspeed Meter Airspeed Differential Sensor kit, suitable for V5+, V5 nano, Pixhawk, APM, PX4 Flight Controller, RC Model Airplane
Be the first to review “CUAV MS5525 Airspeed Sensor Pitot Tube”
You must be logged in to post a review.