Product Quality Guaranteed
We promise to offer best quality of products
Our professional team can help you with all technical questions
Secured Payment Methods
Pay safely via PayPal or Bank
CUAV C-RTK 2 PPK GNSS Module
Only 10 left in stock
- Both support RTK&PPK
- Support hotshoe trigger
- UAVCAN Protocol
CUAV C-RTK 2 PPK GNSS Module | high precision Multi-Star Multi-Frequency RTK PPK GNSS Module
C-RTK 2 is a fully functional, cost-effective RTK module that can record raw data and shutter recording, support RTK and PPK, and can be used as a mobile station or base station. Using CAN bus communication mode, support high-speed USB and TF card storage, built-in RM3100 industrial electronic compass sensor, MS5611 barometer, ICM-42688-P Inertial navigation module module, using STM32H7 processor, running real-time system, especially suitable for aerial survey, agricultural plant protection and other application scenarios.
CUAV C-RTK 2 is a high-performance PPK/RTK positioning module created for professional application fields such as UAV aerial survey; It integrates light appearance, industrial grade IMU, multi-star and multi-frequency satellite receiver, supports both RTK centimeter-level positioning navigation and RAW data recording for post-differential calculation. Supports shutter triggering and hotshoe synchronization. It adopts CAN bus protocol and is compatible with PX4/ArduPilot open-source flight controller. It can be applied to various specifications of multi-rotor, VTOL fixed wing, helicopter and other industrial use UAVs.
Follow us World Drone Market on our YouTube to view more about the CUAV C-RTK 2 PPK GNSS Module.
- High-performance H7 processor
- High precision industrial grade IMU
- Support RTK and save RAW data (PPK) at the same time
- Multi-satellite and multi-frequency receivers
- UAVCAN/Dronecan protocol
- Support hotshoe and shutter trigger
- HS_USB and U disk mode
Multi-star Multi-Frequency High-Precision Positioning
Built-in u-blox F9P multi-star multi-frequency satellite receiver, support GPS, Beidou, Glonass, Galieo four satellite systems, and support the simultaneous reception of four satellite systems, positioning accuracy ≤rtk 0.01 m + 1ppm CEP.
Both RTK&PPK are Supported
CUAV C RTK 2 supports both RTK and PPK functions and supports up to 25Hz raw data recording. It is very suitable for surveying and mapping, unmanned driving, unmanned vehicles, inspection, agriculture and other fields.
Less Control Point
By using C-RTK 2 for mapping, the control point can be reduced by more than 80%. With the use of professional mapping camera, can even realized control point free.
Dual Platforms Support Plug&Play
CUAV C-RTK 2 adopts UAVCAN/Dronecan bus protocol; Perfect compatibility with PX4/ArduPilot; With CUAV series flight controllers, plug and play can be realized.
Applicable to Multiple Scenarios
CUAV C-RTK 2 is very suitable for mapping, UGV, Agricultural and other more scenarios.
The CUAV C-RTK 2 PPK GNSS can support all versions of CUAV Flight Controllers.
|Dimensions||18 × 9 × 12 cm|
|Accuracy(RMS)||RTK Level:0.01 m+1ppm(RMS)
RTK Vertical：0.02 m+1ppm(RMS)
|Sensitivity||Tracking & Nav：-167dBm
|Anti-spoofng||Advanced anti-spoofng algorithms|
|Anti-jamming||Active CW detection and removal Onboard band pass ﬂter|
|Flight controller support||Compatible with flight controllers running ArduPilot/PX4 firmware|
|Type C||1(Hight speed USB)|
|Antenna interface Type||1（mmcx)|
1 review for CUAV C-RTK 2 PPK GNSS Module
01 Customer(s) recommended this item
Good quality, good discount and safe shipping. It was all good.