Zubax BugFace BF1
Zubax BugFace BF1 “Dronecode Probe” is a generic JTAG/SWD + UART console adapter compatible with most ARM Cortex-based designs and in particular with hardware maintained by the Dronecode project. It is supported on all major operating systems (Windows, Linux, and Mac OS). A variety of connectors on the Dronecode Probe allow for instant hardware connectivity to most of the Dronecode-compliant hardware designs, eliminating the need for intermediary boards, adapters, soldering and crimping.
The debugger comes with a DCD-M cable included.
More information and usage instructions are published on the Zubax Knowledge Base.
Supported targets
- STMicroelectronics STM32 series
- Microchip/Atmel SAM series
- NXP LPC series
- Freescale Kinetis
- Texas Instruments LM/TM series
- Silicon Labs EFM32/EZR32
- Xilinx Zynq-7000
- Broadcom BCM2836
See the Black Magic Probe homepage for the full list of supported targets.
Features
- Embedded GDB server on the device. No host-side driver needed (this is unlike, for example, OpenOCD).
- Loading the application into flash or RAM.
- Real-time execution and single-stepping.
- Hardware-assisted breakpoints and read/write/access watchpoints.
- Software breakpoints when executing from RAM.
- Simple integration with development tools and IDE.
- Connectors are compatible with the Dronecode Autopilot Connector Standard.
- Optional +3.3 V power supply delivery to the target.
Based off the open-source Black Magic Probe, the DroneCode Probe offers the following added value:
- Firmware compatible to the Black Magic probe
- Does not require OpenOCD or other software to run GDB on Windows, Linux or Mac OS
- Better setup/usage experience compared to other JTAG probes
- Integrated 3.3V serial adapter for console access
- Solder-free support for common DroneCode cabling options:
- ARM Mini 10 position standard header
- DCD-M: DroneCode Debug connector, medium
For other drone accessories, please visit our Store. Watch more about products on our YouTube.
Be the first to review “Zubax BugFace BF1”
You must be logged in to post a review.