T-Motor G24*7.8 Prop-2PCS/PAIR

T-Motor G24*7.8 Prop-2PCS/PAIR

Spare Parts Bag

Copper Adapter: 6*4-2pcs

Cover for assemble the CF prop directly:20*4*2.4-2pcs

Screw:M3*12-4pcs

INSTALLATION METHOD

Standard installation for MN7005、MN52series、MN6Oseries

Standard Installation for MN7Oseries

T-Motor G24*7.8 Prop-2PCS/PAIR Warning
1. Prop marked with “L” is for CW which “R” for ccW (aerial view).
2. Please be careful when using the propellers as the spinning propellers may cause serious injury.3. The structural strength of the propellers are fully tested. please make sure the propellers are not used beyond thelimits. Please do not tempt to test the strength of the propellers by bending them by hands. Any damage or lossfrom improper use will be on the users’account.
4. Please make sure all the accessories are mounted properly.
5. please check on the propellers before flight and make sure they are in good condition. Please replace propellers with
new ones if fault is found with them.
6. For storage, please keep them away from hostile environments including but not limited to that of H,O, SO. NOzClz, organosilicon, cyanogroup and phenol. Ambient temperature is recommended between 0 and 40’c at less than80% humidity.
7. Please apply anaerobic screw locking glue of medium or above strength when install propellers onto motors.
8. Please use the propellers in compliance with local laws and regulations.

Follow us World Drone Market on our YouTube to view more about the G24*7.8 Prop-2PCS/PAIR.