Search

For bulk order, please contact sales@worldronemarket.com and we will provide the best service and price for you. Thank you!

RFD900+ Bundle

Product codeRFD004
Availability Out of stock

$258.00

What’s inside
  • RFD900+ Radio Modems * 2
  • Antenna, 900MHz Quarter wave monopole 2.1dBi * 1
  • Antenna, 900MHz Right Angle Quarter wave monopole 2.1dBi * 1
  • Antennas, 900MHz Half wave dipole 3dBi * 4
  • FTDI USB cable * 1

RFDesign RFD900+ Modem Bundle

The RFD900+ Bundle is a high-performance, long-range radio data transmission device designed by RF Design which capable of transmitting data over 40 km.

Note: **RFD900+ Modem will be discontinued after out  of stock

Follow us World Drone Market on YouTube channel to view more videos about RFD900+ Bundle.

Features:

  • Long range >40 km depending on antennas and GCS setup *80 km demonstrated by Edge Research labs on a balloon !, 57 km in India, on Dipoles.
  • 2 x RP-SMA RF connectors, diversity switched.
  • 1 Watt (+30dBm) transmit power.
  • Transmit low pass filter.
  • > 20dB Low noise amplifier, high IP3 (Updated on RFD900+)
  • RX SAW filter.
  • All I/O ESD protected and filtered (New on RFD900+)
  • Open source firmware SiK (V1.x) / tools, field upgradeable, easy to configure.
  • Multipoint software capability with MP SiK (V2.x)
  • Small, light weight.
  • Compatible with 3DR / Hope-RF radio modules.
  • License free use in Australia, Canada, USA, NZ

For different versions of RF Design Telemetry, please check World Drone Market.

Interfaces:

  • RF : 2 x RP-SMA connectors
  • Serial: Logic level TTL (+3.3v nominal, +5v tolerant)
  • Power: +5v, ~800mA max peak (at maximum transmit power)
  • GPIO: 6 General purpose IO (Digital, ADC, PWM capable).

RFD900+ Bundle Specifications:

  • Frequency Range:  902 – 928 MHz (USA) / 915 – 928 MHz (Australia)
  • Output Power: 1W (+30dBm), controllable in 1dB steps ( +/- 1dB @=20dBm typical )
  • Air Data transfer rates: 4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250 kbit/sec ( User selectable, 64k default )
  • UART data transfer rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200 baud  ( User selectable, 57600 default )
  • Output Power: 1W (+30dBm)
  • Receive Sensitivity: >121 dBm at low data rates, high data rates (TBA)
  • Size: 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) – Including RF Shield, Heatsink and connector extremeties
  • Weight: 14.5g
  • Mounting: 3 x M2.5 screws, 3 x header pin solder points
  • Power Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power
  • Temp. Range: -40 to +85 deg C, tested operational from -73 to +123 deg C.

Software / GCS Support:

The software solution is an open source development called “SiK” originally by Mike Smith and improved upon by Andrew Tridgell and RFDesign. A bootloader and interface is available for further development and field upgrade of the modem firmware via the serial port.

Most parameters are configurable via AT commands, Eg. baud rate (air/uart), frequency band, power levels, etc., please see the 3DR wiki for commands below for now.

V2.x firmware has been updated to support multipoint networking on the RFD900.

V1.x (non multipoint) is suitable for point to point links – the source code is located at:  https://github.com/RFDesign/SiK

A software manual for SiK firmware is here : RFD900 Software manual

RFD900+ telemetry modem configuration tool and firmware repository: Files

3DR/RFD900 compatible configuration tool : http://vps.oborne.me/3drradioconfig.zip

Integrated support for configuring the RFD900+ radios is supported by APM Planner, with other GCS solutions in development.

The default settings are at 57600 baud, N, 8, 1, and 64k air data rate.

For product installation and configuration, please check RFD900 user manual

Software features include:

  • Frequency hopping spread spectrum (FHSS)
  • Transparent serial link
  • Point to Point, or Multipoint networking
  • Configuration by simple AT commands for local radio, RT commands for remote radio
  • User configurable serial data rates and air data rates
  • Error correction routines, Mavlink protocol framing (user selectable)
  • Mavlink radio status reporting (Local RSSI, Remote RSSI, Local Noise, Remote Noise)
  • Automatic antenna diversity switching on a packet basis in real time
  • Automatic duty cycle throttling based on radio temperature to avoid overheating

Compliance :

The RFD900 is designed to be compliant with the following standards:

  • FCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators)
  • AS/NZS 4268:2012 (Radio equipment and systems – short range devices)

The modem is designed for system integrators who will integrate the modem into their own projects and product prototypes.  The user is responsible for compliance with local regulations for radio transmitters.

1 3 - RFD900+ Bundle

Weight 0.303 kg
Dimensions 24 × 19 × 3 cm

Reviews

There are no reviews yet.

Be the first to review “RFD900+ Bundle”

Back to Top
Product has been added to your cart
error: Alert: Content selection is disabled!!