Mauch HS-200-HV Sensor Board-2x 15cm 8AWG
Mauch HS-200-HV 200A – Current measurement sensor board, based on Allegro Hall Sensor ACS-250U.
The voltage reading of the LiPo is optimized for up to 14S LiPo packs.
Mauch HS 200 HV 2x 15cm 8AWG Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section.
The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry… etc.
Connected to the sensor are 2x15cm AWG8 wire (red) as a standard.
The board comes with 10cm connection cable (DF-13-6pDF-13-6p) to the FC for Pixhawk 1 or APM
For other drone accessories, please visit our Store. Watch more about products on our YouTube.
Be the first to review “Mauch HS-200-HV 2x 15cm 8AWG”
You must be logged in to post a review.