Mateksys PDB-HEX12S compatible

Mateksys PDB-HEX12S compatible

• The Mateksys PDB-HEX12S compatible (Power Distribution Board – Hexacopter) is a power distribution board designed for hexacopters and is compatible with 12S (50.4V) power systems. It serves as a central hub for distributing power to various components in the hexacopter, such as the flight controller, ESCs (Electronic Speed Controllers), motors, and any other auxiliary devices.
• The Mateksys PDB-HEX12S compatible typically features multiple power inputs and outputs to accommodate the power requirements of the hexacopter. It ensures efficient power delivery and helps prevent voltage drops, ensuring stable performance throughout the flight.
• Additionally, the PDB-HEX often includes functionalities such as voltage regulators, current sensors, and power filters to enhance the overall reliability and safety of the power distribution system. These features help protect the components from voltage spikes, current surges, and electrical noise.
• Overall, the PDB-HEX is a 12S compatible power distribution board tailored for hexacopters, providing an organized and reliable power distribution system for efficient and safe flight operations.

Follow us World Drone Market on our YouTube to view more about the  PDB-HEX12S compatible

Specifications

PDB

• Input voltage range: 6~60V (2~12S LiPo)
• PDB/current sense resistor: 140A cont, 264A burst.
• ESC power pads: 60A cont. 100A burst
• 6x ESC power /signal/ telemetry pads
• Current Senor: 264A, 3.3V ADC
• Current Scale 125(INAV/BF), BATT_AMP_PERVLT 80 (ArduPilot)

JST-SH-8P Connector and Pads

• Vbat: Battery voltage
• G: ground
• Curr: current signal
• Tlm: Duplicates Tlm pads for ESC telemetry
• S1/S2/S3/S4/S5/S6: ESC signal
• Vx: Regulator output

BEC Vx output (5V default)

• Vx= 5V by default, Continuous 5 Amps
• Bridge 9V jumper, Vx= 9V, Continuous 4 Amps, Max.5A
• Bridge 12V jumper, Vx= 12V, Continuous 4 Amps, Max.5A
• Output Short-circuit tolerant (1 seconds)
• Overcurrent protection & self-recovery

Voltage divider

• 1K:20K resistors
• Output 1/21 Vbat voltage

Physical

• Mounting: 30.5 x 30.5 mm, 20 x 20 mm, Φ3 mm
• Dimensions: 49 x 40 x 6 mm
• Weight: 12g