NEO V2 GPS User Manual
CUAV NEO V2 GPS is a cost-effective unmanned system positioning and navigation module, which integrates a compass, flight controller status light, buzzer, and safety switch; it has the characteristics of high sensitivity and strong anti-interference.
Product Features
- GPS positioning: provide accurate positioning information for unmanned system equipment
- Electronic compass: provide accurate heading and attitude information
- FC status reminder: circular RGB display flight control status
- Alarm function: Provide an alarm when the drone has information that threatens safe flight
- Safety protection: Provide physical buttons to avoid accidental motor rotation and protect you and the equipment
Technical Parameters
Key data
Annotate | |
---|---|
Processor | STM32F412 |
Compass | IST8310 |
GNSS receiver | UBLOX NEO M8N |
RGB drive | NC5623C |
Buzzer | Passive buzzer |
Safety switch | Physical button |
GNSS | Beidou、Galileo、 GLONASS、 GPS |
GNSS Augmentation System | SBAS:WAAS,EGNOS,MSAS QZSS:L1s(SAIF) other:RTCM3.3 |
Number of concurrent GNSS | 2(Default GPS+GLONASS) |
Frequency band | GPS:L1C/A GLONASS:L10F Beidou:B1I Galileo:E1B/C |
Horizontal accuracy | 2.5M |
Speed accuracy | 0.05M/S |
Nav. update rate | 10Hz(Max) |
Acquisition | Cold start:24S Hot start:1S Aided start:2s |
Number of satellites(MAX) | 22+ |
Sensitivity | Tracking and nav-167dBm Cold start -148dBm Hot star–157dBm Reacquisition -160dBm |
Protocol | UART+IO+I2C |
Port TYpe | GHR-10V-S |
Supported flight controller | CUAV series, Pixahwk series |
Wave filtering | SAW+LNA+SAW |
Anti-Electromagnetic/radio frequency interference | EMI+RFI |
Upgrade firmware | support |
Support Flight control type | Ardupilot/PX4*(PX4 is still working hard to adapt to the clock) |
Input voltage | 5V |
Operating temperature | -10~70℃ |
Size | 60*60*16MM |
Weight | 33g |
When you connect NEO V2 to other brands of flight controllers (non-CUAV flight controllers), the buzzer will not work. If you need to use other brands of flight controllers, please select NEO V2 Pro.
Size
For other drone accessories, please visit our Store.
connection to V5+
The connection of other PIX flight controllers is the same.
Pinouts
Flight control parameter setting
CUAV Neo 2 is a plug-and-play module without parameter settings.
CUAV NEO V2 GPS GNSS Module w/ U-BLOX M8N GPS E-Compass Buzzer LED for V5 Flight Controller FPV RC Racing Drone
Watch more about products on our YouTube.
Leave a comment
You must be logged in to post a comment.