Mauch PL-250 Sensor board / 2x 15cm 8AWG / With CFK Enclosure

Mauch PL-250 Sensor board / 2x 15 cm 8AWG / With CFK Enclosure

Please purchase a matching Mauch BEC together with this sensor board. Any BEC from the PL-Series or PC-Series will fit this board.

250A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS770-250U.

Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details.

This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

Connected to the sensor are 2x15cm AWG8 wire (red) as a standard.

REM: The connector is Molex / Click-Mate / 1.25 mm / 4p (5023800400)

Without CFK enclosure = 27.5 x 19.5 x 10.5 mm / 39g (with 2x 15 cm 8AWG)

With CFK enclosure = 43.5 x 23.0 x 15 mm / 44g (with 2x 15 cm 8AWG)

Delivery in PP box: 88 x 60 x 20 mm / 59g

Delivery without sensor cable (comes with the BEC’s), with ABS/CFK enclosure

For other drone accessories, please visit our Store. Watch more about products on our YouTube.