Mauch PC 2x 200A PDB/4x 20cm 10AWG

Mauch PC 2x 200A PDB/4x 20 cm 10AWG

Mauch PC 2x 200A PDB/4x 20cm 10AWG is suitable for Pixhawk 2.1 (The Cube) and other flight controllers as an all-in-one PDB, connected via adapter cables. It integrates 2x 200A Hall sensors, a Sensor Hub X2, and a 4-14S HYB-BEC. Most importantly, it features a main power switch with a continuous current capacity of 400A. The output is connected via 3.5mm banana plugs, and there are additional BEC connectors before and after the switch.

This design lets you connect the main batteries to heat up the Cube and get GPS lock without powering up all the rest of the equipment. When ready, just press the power switch and fly.

This new PC Series PDB includes two fully redundant BEC’s with POWER1 and POWER2 for the FC. A higher output current of 2x 5A per BEC. Fully redundant power supply for the PDB control circuit… etc.

Less wiring = Cleaner builds

Protect your ESC’s and other equipment due to smooth power-up from GND.

Specifications:

Input 2x 4-14S (max.65V) with transient spikes of up to 85V.

2x 200A = 400A (continues) 1,200A @ 25’C for 1sec.

Hub X2 can be deactivated for single battery usage.

2x 5.3V / 5A power supply for Flight Controller

2x 20cm 10AWG input cables (red/black)

Only 75 x 49 x 27mm → 112g (without cables)

Recommended maximum AUW of UAV = 50kg