ToolkitRC M7 Balance Charger

ToolkitRC M7 200W Multifunctional Balance Charger

The ToolkitRC M7 Balance Charger is a 200W multifunctional balance charger with 33.3% more power than the M6. With its IPS wide-angle display and simplified interface, this charger is ideal for outdoor viewing. The scroll wheel allows for better control for years of trouble-free use! M7 is a multifunctional tool chain product that integrates functions such as a balanced charger and discharger, an electric display, a signal measuring device, and a signal source.

• Can charge and discharge and balance management of LiPo, LiHV, LiFe Lion 1-6S, NiMh 1-16S, PB 1-10S batteries
• Charge Current：MAX 10A @MAX200W
• Discharge Current: Recycle mode Max 10A @200W / External mode Max 10A @200W / Inter mode Max 3A @10W
• Lithium battery cut-off voltage can be set (TVC function)
• Can measure battery voltage, battery internal resistance, lithium battery balance management
• Can measure the signal value of PWM/PPM/SBUS, with an accuracy of 1 microsecond
• Can output PWM/PPM/SBUS standard signals with an accuracy of 1 microsecond
• Constant current and constant voltage source output, customizable 1-28V constant voltage, 1-10A constant current
• Can be adapted to mainstream drone batteries, automatically activated and charged
• Multi-language system, you can upgrade any language you need
• USB 2.1A@5.0V output, rechargeable mobile devices
• The device is simulated as a U disk, and the upgrade file is copied to realize the product firmware upgrade

Follow us World Drone Market on YouTube to view more videos about ToolkitRC Balance Charger.

Features:

• 240 X 320 Screen Resolution
• IPS Wide-angle display
• Simplified Interface
• Electricity Measure
• Multi-functionality
• Balance Charge
• Multi-language
• Signal Source
• Drone Charge
• Signal Testing

ToolkitRC M7 Balance Charger Specifications:

• LCD: IPS 2.0inch LCD 320*240 Pixel
• Product size: 73*51*27 mm
• Pack size: 84*79*39 mm

M7 200W Charger

• Discharge power: 200W @MAX 10A Recycle mode / 10W@3A Normal mode
• Type of battery: Lipo LiHV LiFe Lion@1-6S / NiMh @1-16S Pb @1-10S
• Input voltage 7.0-28.0V @MAX 12A
• Charger power: 200W @MAX 10A
• Balance current400mA @2-6S
• USB: 2.1A @5.0V or Upgrade

Output

• Power supply: 1.0-28.0V @1.0-10A mode: CC+CV
• SBUS: 880-2200us*16CH @20-100Hz
• PPM: 880-2200us*8CH @20-50Hz
• PWM: 500-2500us @20-1000Hz
• OverCurrent Cutoff time: <5ms

Measurer

• SBUS: 880-2200us*16CH @20-100Hz
• Internal resistance: 1-99mR @1-6S
• PPM: 880-2200us*8CH @20-50Hz
• ESC: 200W@10A PWM Output
• PWM: 880-2200us @20-400Hz
• Voltage:1.0-5.0V @1-6S

Quick Start

1. Connect the 7-28V power supply to the input port on the back of the M7.
2. The display shows the boot logo and stays for 2 seconds.
3. Simultaneously with do-re-mi boot sound.
4. After the boot is completed, the screen enters the main interface and displays as follows:
5. Long press [Exit] to enter the auxiliary function interface.
6. Scroll [Scroll Wheel] to switch the page below.
7. Short press [OK] to select the charging task when the charger is idle. You can adjust and finish the work when the charger is working.
8. Long press [OK] to enter the system setting interface 10 @ToolkiRC 2021 when the charger is idle.
9. Short press [Exit] to end the modification or return to the previous interface.

Safety

1. M7 allows an input voltage of 7-28V, to ensure that the power supply voltage is consistent, pay attention to the positive and negative polarity of the power supply when connecting.
2. Do not use this product in the environment of heat, humidity, flammable and explosive gas.
3. Please use this product when some one is guarded to prevent accidents.
4. When not using this product, please unplug the input power in time.
5. When using the charging function, please set a current that matches the battery.
6. Donot set an excessive current for charging to avoid damage to the battery.

For more ToolkitRC charger, please visit World Drone Market.

For installation and configuration, please check ToolkitRC Charger MANUAL