Tattu 1800mAh 75C 3S1P Lipo Battery Pack

Tattu 1800mAh 75C 3S1P Lipo Battery Pack

The 1800mAh 75C 3S1P lipo battery packs feature a high-quality solid build. First, strong aluminum plates are attached to the top and bottom of each lipo battery. This design adds extra crash protection for the packs, yet it does not add excessive weight.

Besides physical protection, these 1800mAh 75C 3S1P lipo batteries offer other key advantages. They run at low landing temperatures and deliver a high C rate. Moreover, the cells are not prone to puffing even under continuous full throttle. As a result, these 3S lipo batteries serve as an ideal power solution for UAV and FPV flying.

Features:

– Stable automatic stacking technology enables single-cell capacities of 1800mAh.
– The most strict single cell capacity, voltage, resistance, discharge curve matching process.
– Superior Japan and Korea Lithium Polymer raw materials.
– Local after-sales service(located in Dublin, CA)

For other drone accessories, please visit our Store. Watch more about products on our YouTube.

Specifications:

• Minimum Capacity: 1800mAh
• Configuration: 3S1P / 11.1V / 3 Cells
• Discharge Rate: 75C
• Max Burst Discharge Rate: 150C
• Net Weight(±20g): 159g
• Dimensions: 105mm Length x 35mm Width x 19.3mm Height
• Charge Plug: JST-XHR
• Discharge Plug: XT60

Application:

Tattu 1800mAh with XT60 plug is suitable for Skylark M4-FPV250, INDY250 PLUS, Vortex, Emax Nighthawk 250, MOJO 280, and other FPV drones etc.

Our Advantage:

1. Energy Density: Specially adapted to each UAV type and RC car/boat/helicopter type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously.
2. Low IR: Provides stable voltage until the end of your mission.
3. Safety: Gens Ace and its’ partners fulfill the ISO9001, ISO14001, standards.