SPECIFICATIONS
• Item: TX15 / TX15 MAX Radio
• Size: 178*168*81mm
• Weight: 605g / 672g MAX (without battery)
• Frequency: ISM 2.4GHz or Sub-G 900
• Max Current: 875mA
• Voltage Range: 6. -8.4V DC
• Radio Firmware: EdgeTX (requires version 3.0.0 or later)
• Wireless Firmware: ExpressLRS
• Gimbal Sticks M4
• Gimbals: V5 or AG02
• Control distance: Max 2Km
• Channels: Max 16 channels (RX dependent)
• Battery Options: 7.4V 2-cell Lithium-Polymer or 2x 3.7V 18650 Lithium-Ion
• LCD Screen: 3.5inch IPS Touchscreen
• External module: JR bay
• Upgrade Method: USB
MODEL & PROTOCOL SELECTION
ExpressLRS Version
The TX15 is equipped with a built-in dual-band, dual-frequency ExpressLRS RF module, offering compatibility with a wide range of receivers:
• 2.4GHz receivers
Packet Rate Selection:
To select the appropriate Packet Rate on your TX15 remote control, follow these options based on the receiver type:
• 50Hz-500Hz 2.4G:
For binding with any ExpressLRS 2.4GHz receiver.
BIND INSTRUCTIONS
1. TURN OFF the transmitter.
2. Cycle power to the receiver 3 times, the receiver LED will flash twice – indicating bind mode.
3. TURN ON the transmitter, press the SYS button and choose ExpressLRS LUA under the TOOLS menu. Scroll to [Bind] and press enter.
4. The LED on the receiver should now be solid, indicating a successful bind.
Leave a comment
You must be logged in to post a comment.