T-Motor AT 75A 6S
FOR YOUR SAFETY The Fearless Challenge
T-Motor AT series ESC is a fixed-wing ESC. It supports 2–6S batteries.
Follow us World Drone Market on our YouTube to view more about the T-Motor AT series ESC.
EXCELLENT PERFORMANCE & RELIABLE QUALITY
T-Motor AT series ESC runs a dedicated fixed-wing core algorithm. It optimizes software structure for smooth, precise motor control. We use original imported components and a carefully designed PCB layout. It delivers high reliability, stable performance and good value.
SUPPORT FOR BEC OUTPUT
It has a stable, high-efficiency BEC module. The BEC keeps the ESC safe across different power supply setups.
HIGH SPEED THROTTLE RESPONSE
Hardware filtering and synchronous continuous current functions speed up throttle response. They also make throttle control more dependable.
Multiple Software Protection
The ESC includes built-in safety checks:
- Abnormal voltage protection
- ESC overheat protection
- Battery low-voltage protection
- Throttle signal loss protection These features improve aircraft safety during testing and flight.
MULTIPLE PROGRAMMABLE PARAMETERS
You can adjust a wide range of parameters easily. It fits many different flight environments. You may set parameters via an LED programming card. The card simplifies the whole setup process.
T-Motor AT 75A 6S Protection Functions
- Start-up protection If the motor fails to start within 2 seconds after you raise the throttle, the ESC cuts power output. Pull the throttle stick all the way down to restart the motor. This trigger usually comes from loose wiring, broken motor wires, blocked propellers or stuck reduction gears.
- Temperature protection When ESC temperature rises above roughly 110°C, the unit reduces output power. It does not shut down completely. It limits power to 60% of maximum. This keeps the motor running and prevents sudden drops. Power returns gradually once the ESC cools down.
- Throttle signal loss protection If the ESC loses throttle signal for 1 second, it lowers power. If signal loss lasts 2 seconds, it cuts all output. If signal recovers during power reduction, throttle control resumes right away. This design helps you save the aircraft. Short signal glitches will not trigger an immediate power cut.
- Overload protection Sudden heavy load triggers automatic power cut or restart. Locked motor rotors are the most common cause of sharp load spikes.
Program the ESC with Your Transmitter (4 Steps)
You can program this ESC in four simple steps:
- Enter program mode
- Select programmable items
- Set parameter value
- Exit program mode
Note: Set your throttle curve correctly. Throttle at bottom = 0%. Throttle at top = 100%.
Step 1: Enter program mode
- Turn on your transmitter. Push the throttle stick to the top.
- Connect the battery to the ESC.
- Wait 2 seconds. The motor makes a “beep-beep-” tone.
- Wait another 5 seconds. You will hear the “56712” tone sequence. This tone means you have entered program mode.
Step 2: Select Parameter Items
After you enter programming mode, the ESC cycles through 12 unique beep patterns. When you hear the target beep, pull the throttle stick down within 3 seconds. This action opens that parameter menu.
- “B-” — Brake Type (1 short beep)
- “B-B-” — Brake Force (2 short beeps)
- “B-B-B-” — Voltage Cutoff Type (3 short beeps)
- “B-B-B-B-” — LiPo Cells (4 short beeps)
- “B—–” — Cutoff Voltage (1 long beep)
- “B—–B-” — BEC Voltage (1 long + 1 short beep)
- “B—–B-B-” — Start-up Mode (1 long + 2 short beeps)
- “B—–B-B-B-” — Timing (1 long + 3 short beeps)
- “B—–B-B-B-B-” — Motor Direction (1 long + 4 short beeps)
- “B—–B—–” — Freewheeling (2 long beeps)
- “B—–B—–B-” — Factory Reset (2 long + 1 short beep)
- “B—–B—–B-B-” — Exit (2 long + 2 short beeps)
Note: One long beep equals five short beeps. Use this rule to tell the 6th option apart.
Step 3: Select Parameter Values
The motor cycles through beep codes for available values. When you hear the value you want, push the throttle stick up within 3 seconds. You will hear a “i5i5” confirmation tone. The ESC saves your setting and returns to the parameter selection menu. You may continue adjusting other settings.
Step 4: Exit the Programming
Listen for two long beeps plus two short beeps from the motor. Pull the throttle stick down within 3 seconds to exit programming. The motor beeps once for each LiPo cell connected. One final long beep tells you the power system is ready to fly.





























There are no reviews yet.